NTP即是服務器，又是客戶端，只需要通過配置即可。

準備兩臺機器分別作為服務端（IP地址設為192.168.10.10）和客戶端（IP地址設為192.168.10.12）。

服務器：NTPD服務，負責與外部公共NTPD服務同步標準時間，作為內外網絡的NTPD服務。

客戶端：NTPclient，與服務器同步時間。

ubuntu系統

1.安裝ntp，因?yàn)閚tp服務既是服務器，又是客戶端，因此兩端安裝方式一樣

sudo apt-get install ntp

2.配置NTP-Server

# vim /etc/ntp.conf

# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help

driftfile /var/lib/ntp/ntp.drift

# Enable this if you want statistics to be logged.

#statsdir /var/log/ntpstats/

statistics loopstats peerstats clockstats

filegen loopstats file loopstats type day enable

filegen peerstats file peerstats type day enable

filegen clockstats file clockstats type day enable

# You do need to talk to an NTP server or two (or three).

#server ntp.your-provider.example

#NTP服務

server 210.72.145.44 perfer # 中國國家受時中心

# 外部時間server不可用時，以本地時間作為時間服務

server 127.127.1.0 # local clock

fudge 127.127.1.0 stratum 10

# 同意上層時間server主動改動本機時間

restrict 210.72.145.44 nomodify notrap noquery

# 同意內網其它機器同步時間

restrict 192.168.10.0 mask 255.255.255.0 nomodify notrap

# pool.ntp.org maps to about 1000 low-stratum NTP servers. Your server will

# pick a different set every time it starts up. Please consider joining the

# pool: <http://www.pool.ntp.org/join.html>

pool 0.debian.pool.ntp.org iburst

pool 1.debian.pool.ntp.org iburst

pool 2.debian.pool.ntp.org iburst

pool 3.debian.pool.ntp.org iburst

# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for

# details. The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>

# might also be helpful.

#

# Note that "restrict" applies to both servers and clients, so a configuration

# that might be intended to block requests from certain clients could also end

# up blocking replies from your own upstream servers.

# By default, exchange time with everybody, but don't allow configuration.

restrict -4 default kod notrap nomodify nopeer noquery limited

restrict -6 default kod notrap nomodify nopeer noquery limited

# Local users may interrogate the ntp server more closely.

restrict 127.0.0.1

restrict ::1

# Needed for adding pool entries

restrict source notrap nomodify noquery

# Clients from this (example!) subnet have unlimited access, but only if

# cryptographically authenticated.

#restrict 192.168.123.0 mask 255.255.255.0 notrust

# If you want to provide time to your local subnet, change the next line.

# (Again, the address is an example only.)

#broadcast 192.168.123.255

# If you want to listen to time broadcasts on your local subnet, de-comment the

# next lines. Please do this only if you trust everybody on the network!

#disable auth

#broadcastclient

配置文件改動完畢，保存退出。重啟服務。

# service ntpd restart

查看服務狀態

#service ntpd status

查看服務連接和監聽

# netstat -tlunp | grep ntp

ntpq -p 查看網絡中的NTPserver

#ntpd -p

3.配置NTP-Clients

# vim /etc/ntp.conf

# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help

driftfile /var/lib/ntp/ntp.drift

# Enable this if you want statistics to be logged.

#statsdir /var/log/ntpstats/

statistics loopstats peerstats clockstats

filegen loopstats file loopstats type day enable

filegen peerstats file peerstats type day enable

filegen clockstats file clockstats type day enable

# You do need to talk to an NTP server or two (or three).

#server ntp.your-provider.example

server 192.168.10.10

# pool.ntp.org maps to about 1000 low-stratum NTP servers. Your server will

# pick a different set every time it starts up. Please consider joining the

# pool: <http://www.pool.ntp.org/join.html>

pool 0.debian.pool.ntp.org iburst

pool 1.debian.pool.ntp.org iburst

pool 2.debian.pool.ntp.org iburst

pool 3.debian.pool.ntp.org iburst

# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for

# details. The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>

# might also be helpful.

#

# Note that "restrict" applies to both servers and clients, so a configuration

# that might be intended to block requests from certain clients could also end

# up blocking replies from your own upstream servers.

# By default, exchange time with everybody, but don't allow configuration.

restrict -4 default kod notrap nomodify nopeer noquery limited

restrict -6 default kod notrap nomodify nopeer noquery limited

# Local users may interrogate the ntp server more closely.

restrict 127.0.0.1

restrict ::1

# Needed for adding pool entries

restrict source notrap nomodify noquery

# Clients from this (example!) subnet have unlimited access, but only if

# cryptographically authenticated.

#restrict 192.168.123.0 mask 255.255.255.0 notrust

# If you want to provide time to your local subnet, change the next line.

# (Again, the address is an example only.)

#broadcast 192.168.123.255

# If you want to listen to time broadcasts on your local subnet, de-comment the

# next lines. Please do this only if you trust everybody on the network!

#disable auth

#broadcastclient

 配置文件改動完畢，保存退出。重啟服務。

# service ntpd restart

 查看服務狀態

#service ntpd status

 配置完成，可以手動修改客戶端時間，然后靜置10幾分鐘，客戶端就會跟服務器同步